Steering

Sometimes, aftermarket doesn't cut it. Break out your fabrication skills, and build some hardcore steering for your rig with these parts.

  •  Permanex - Reamer Bit - GM 1-ton (REAM)

    Permanex - Reamer Bit - GM 1-ton

    This reamer bit is exactly what you need to drill out your knuckles to fit GM 1-Ton tie rod ends. It will also work with high-angle rod end tapering needs, you just have to drill a bit deeper.  Can be used by hand with a tap wrench, in a drill...

    $65.00
    Add to Cart
  • RuffStuff - 1.5" OD Tube Clamp (R1697) RuffStuff - 1.5" OD Tube Clamp (R1697) Overview

    RuffStuff - 1.5" OD Tube Clamp

    RuffStuff's 6-bolt tube clamp for 1.5" outside diameter tube. Made from 1/2" wall tube and uses 1/4" allen head bolts. In case you just skipped over that, HALF-INCH WALL! This clamp is pure beef! Great for mounting ram assist or stabilizer onto steering...

    $33.00
    Add to Cart
  • RuffStuff 3/4" Heim Steering Kit (34STEER) RuffStuff 3/4" Heim Steering Kit (34STEER) CAD Overview

    RuffStuff - 3/4" Heim Steering Kit

    Before you take a look at this kit consider something.... If you are using High Steer Arms you should use the 7/8" kit, it is only $10 more and substantially stronger. This kit should only be used when using the stock knuckle mount and it is too...

    $225.00
    Add to Cart
  • RuffStuff 7/8" Heim Steering Kit (78STEER) RuffStuff 7/8" Heim Steering Kit (78STEER) CAD High Steer

    RuffStuff - 7/8" Heim Steering Kit

    This is your not so basic steering setup that uses 7/8" heims with easier adjustment & much stronger tubing. The RuffStuff Specialties kit can be used with stock steering position on the knuckle or High Steer arms. The arms or knuckles would need a...

    $235.00
    Add to Cart
  • RuffStuff Crossover Steering Kit (XOGMSTE) RuffStuff Crossover Steering Kit (XOGMSTE) Overview

    RuffStuff - Crossover Steering Kit

    This is your not so basic steering setup that mocks the factory setup with easier adjustment & much stronger tubing. This kit can be used with High Steer arms. The tie rod taper is the standard GM 1 ton. The adjustment is easier because...

    $245.00
    Choose Options
  • RuffStuff Tapered Steering Knuckle Insert (INSSTEER)

    RuffStuff - Tapered Steering Knuckle Insert

    An excellent option when using a larger GM taper without buying a tapered reamer. All you need is a 7/8" drill bit which is much less expensive than the reamer. Drill your knuckles to 7/8" bore and drop these in. Can be used for either Over-The-Knuckle...

    $8.00
    Add to Cart
  • RuffStuff Y-Link Steering Kit (YLINK) Parts Overview RuffStuff Y-Link Steering Kit (YLINK)

    RuffStuff - Y-Link Steering Kit

    This is your not so basic steering setup that mocks the factory setup with easier adjustment & much stronger tubing. The RuffStuff Specialties y-link steering kit can be used with stock steering position on the knuckle or High Steer arms. The taper...

    $240.00
    Choose Options