We have a wide variety of rod ends, joints, and bushings available for whatever project you have.
Clayton Offroad's JK flip kit bushings is CNC machined from steel and then gold/yellow zinc plated. It allows you to drill out your OE JK passenger side upper knuckle and insert this bushings in order to install a right hand drive drag link. In order for...
Flip Kit Tie Rod Bushing
This CNC machined tapered bushing allows you to drill out the knuckle to 3/4" and then use a OE style WJ tie rod end on top of the knuckle.
XJ Front Leaf Spring Bushing
(RB-121 Rubber Bushing 2x2-1/2x3-1/8x9/16)
This is a replacement bushing for Clayton Offroad's XJ 4.5" and 6.5" leaf spring. This item is designed to be pressed into the leaf spring eye and uses the stock 9/16s through bolt...
This is a custom machined control arm bushing housing which accept the Clevite bushing. They are machined from 3/8 thick DOM tubing for a press fit.
This housing is intended to be used with the Clevite Bushing PN SB02B601523.
XJ Rear Leaf Spring Bushing
(RB-071 Rubber Bushing 1-1/2x2-1/2x2-3/4x9/16)
This is a replacement bushing for Clayton Offroad's XJ 4.5" and 6.5" leaf spring. This item is designed to be pressed into the leaf spring eye and uses the stock 9/16s through...
One 1-1/4" Heat Treated Chromoly Rod End with all the trimmings! You get one 1 1/4" Heim with a 1" through bore, a pair of zinc plated misalignment spacers with 30 degrees of misalignment, one zinc plated jam nut, and a weld in tube adapter to go...
This is it, a pair of 1 1/4" Heat Treated Chromoly Rod Ends with all the trimmings! You get two 1-1/4" Heims with a 1" through bore, 4 zinc plated misalignment spacers with 30 degrees of misalignment, a pair of zinc plated jam nuts and the pair of...
1--7/8" X 7/8" Bore Heat Treated Chromoly Heim
1--7/8" Tube Adapters (1.5" or 1.25" Tube ID)
1--7/8" Jam Nut
2--Misalignment Spacers (For 2" ID brackets)